Ricoh SP C250DN Getting Started Manual page 12

5. Scroll [ ] to [WPS], and press [OK].

6. Select [PBC], and press [OK].
7. Firmly press the router's [WPS] button, within two minutes.
Note:
Connection succeeded: Display reads: PBC Connection Succeeded.
•
Connection failed: Display reads: PBC Connection Failed. Restart the machine,
•
check that the router is working properly, and then try again. If the problem
persists, contact 1-800-RICOH38 (742-6438), option #1.
Check wireless connection status:
•
[Wi-Fi Status]. Display should read, Connected. To exit, press [Menu].
Config.]

Appendix B: Check Connection
Confirm printer's IP address: Press [Menu]
•
Configuration] [IP Address]. Write the IP address down. To exit, press [Menu].

address is also on the Configuration Report. See
8. Next, install Network Printer Driver. See
RICOH SP C250DN/SP C252DN Color Laser Printers
Press [Menu][Host Interface][Network
Status.
[Host Interface]

Appendix B: Print Configuration Report.
3.2 Network Printer Driver
Getting Started Guide
Settings]
Note: Also see
[Network Settings]
 
The printer's IP
Install.
[Wi-Fi
[IPv4
12