Ricoh SP C250DN Getting Started Manual page 37

3. Click [Network Settings], and then select [Wireless] tab.
4. Set [Wireless] to [Active].
Adjust Wireless LAN Settings to match those of your Wi-Fi router, as outlined below.
Setting
SSID The available access point is displayed. To see additional access points, click [Scan
Communication
Mode
Ad Hoc Channel
Authentication Select authentication method:
5. Adjust Wireless LAN Settings to match those of your Wi-Fi router, as outlined below:
Setting
SSID Click [Scan List] to see available access points, if necessary. Select the
Communication
Mode
Ad Hoc Channel Please see note on
Authentication Select Authentication method:
Encryption Select Encryption method based on chosen Authentication method.
WPA Passphrase If [WEP] is selected for Encryption method, enter enabled fields. If [WPA2-PSK]
RICOH SP C250DN/SP C252DN Color Laser Printers
List].
If necessary, select [Infrastructure].
If Ad Hoc is selected for Communication Mode, select the Ad Hoc channel. Also see
overview of Ad Hoc mode in
aa
Open System
•
Shared Key
•
WPA2-PSK
•
Mixed Mode WPA/WPA2
•
destination SSID and configure associated settings.
Select [Infrastructure], if necessary.
next
Open System
•
Shared Key
•
WPA2-PSK
•
Mixed Mode WPA/WPA2
•
Open System: Set [None] or [WEP]
•
Note: If Encryption method is set to [None], go to 5.
Shared Key: [WEP] only
•
WPA2-PSK: Set [CCMP (AES)]
•
Mixed Mode WPA/WPA2: Set [TKIP/EAS]
•
or [Mixed Mode WPA/WPS2] is selected for Authentication, enter enabled
fields.
Description
previous section.
Description
page.
Getting Started Guide
37