Siemens OP5 Equipment Manual page 69

Identification of A recipe is identified by a recipe number and a recipe title specified during
recipes and data
configuration.
records
A data record is identified by a data record number and a data record name
assigned in the OP.
The clear and unmistakable identification factor for a data record is the data
record number and not the data record name.
This means that, although several data records with the same name may ex-
ist, several data records with the same number cannot exist. If no name is
assigned to a data record, it is assigned the name "data record".
Standard screens Standard screens with the following functions are available for data records.
for data records
Figure 8-2
Directory for Recipes are combined into a recipe directory which can be used to indicate
recipes
them on the display, and to print and edit them. A recipe is located in the
recipe directory under its recipe number and its recipe title.
Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618
Record
Edit Print Transfer
| |
1 2
Standard screens for data records
1 Set up, edit and delete data re-
cords
2 Print data records
3 Transfer data records from the
|
OP to the PLC or vice versa
3
Recipes
8-3