Choosing Screens - Siemens OP5 Equipment Manual

5.2

Choosing Screens

Choosing screens Screens can be viewed on the OP and serviced (edited) and printed. Before
this is possible, they have to be chosen.
A screen can readily be chosen by means of
Choosing with
With soft keys, you can branch from one screen to another. The branch is
soft key defined in the configuration.
Choosing with
The configured assignment of the function keys, unlike the soft keys, is valid
function key globally. In this way the screen that was permanently defined during configu-
ration can be selected in any operating situation.
Choosing with
Depending on the action you want to take, call on of the two standard screens
screen directory Screens
on the display. It contains only pictures which were included in the directory
during configuration. You scroll through the screen directory using the arrow
keys. A screen is chosen by pressing the ENTER key.
As an alternative to the standard screen Screens
screen directory using the DIR key on the system keyboard. A screen chosen
with ENTER can be edited but not printed.
Choosing with To implement operator guidance, a screen can be chosen from the PLC by
PLC job
means of a PLC job. In this instance, the cursor is already positioned in a
specified entry or in an input field, in which the operator can perform his
input.
Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618
soft key,
function key,
directory,
PLC job.
Edit or Screens Print. Thereupon the screen directory is shown
Screens
Edit, you can call the
5-3