Siemens OP5 Equipment Manual page 140

System Messages
Message Cause
$ 326 Recipe selected in the PLC is not
active. Data record transfer not
possible
$ 327 Invalid recipe number in the PLC
job
$ 328 Recipe number in the PLC job
greater than 99
$ 329 Same number for destination and
source
$ 330 Source or destination not specified
$ 331 Data record specified as source
does not exist.
$ 332 Data record number in the PLC job
greater than 99
$ 333 Data record number in PLC job in-
valid
$ 335 Confirmation of alarm message in-
hibit
$ 336 Printer cannot be addressed
$ 337
$ 338
$ 339 Communication with PLC resumed
$ 340 You cannot operate the OP with sta-
tus function running on PU
$ 401 Entered value does not match dis-
play format
$ 402 Operating error in STATUS VAR or
FORCE VAR screen;
(after pressing INS when 10th vari-
able line already assigned).
$ 403 Incorrect time input
$ 404 Incorrect date input
$ 406 Operating error in STATUS VAR or
FORCE VAR screen
$ 409 Lower limit for input ignored
$ 410 Upper limit for input ignored
B-6
Action
Select active recipe on the OP
Specify different data record numbers for
source and destination.
Specify source and destination.
Change PLC program.
Set up missing data record or specify another
data record in the PLC job.
Check printer and connection to OP
Abort updating
(ESCAPE key)
Enter a value greater than or equal to Var
Enter a value smaller than or equal to Var
( ) J31069-D0840-U001-A2-7618
Manual OP5, OP15