J31069-D0840-U001-A2 - Siemens OP5 Equipment Manual

Product Description
Figure 1-1
Static and variable
Text which is required to be displayed on the OP has first to be created on the
text components PC/PU with ProTool/Lite and then transferred to the OP. If, for example, text
for display is required to comprise static and variable components, the vari-
ables have to be configured and the static text for explaining the variables has
to be entered – for example:
Here, Temperature C of Furnace 1 is the static text and Vari-
able_xx is the variable that is read from the memory area of the PLC.
Further
You will find information on configuring the OP in the ProTool/ Lite User's
information Guide. The Communications User's Guide provides information on connect-
ing the OP to the PLC.
1-2
Configuration and Process Control Phase
Temperature Variable_xx C of Furnace 1
Manual OP5, OP15

( ) J31069-D0840-U001-A2-7618