Siemens OP5 Equipment Manual page 105

15.3 Connecting a Configuration Computer
Interfaces for the Connect a configuration computer – for example, a programming unit – tem-
connections porarily to the OP interfaces which are shown in figure 15-3 and which are
used only to download configuration data. Standard cables are available for
the connections shown in the figure (refer to the ST80.1 catalog).
Figure 15-3 Connection Configuration Scheme for a Configuration Computer
Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618
V.24
OP
TTY passive
OP5
IF1
OP15
TTY passive
V.24
Electrical Installation
PC
COM1/2
(25-pin)
TTY/V.24 converter
PU 7xx
COM1
(25-pin)
COM2
(9-pin)
15-5