Siemens OP5 Equipment Manual page 143

Message Cause
$ 620 Wrong parameter transferred by
ProTool/Lite (function keyboard)
$ 621 Wrong parameter transferred by
ProTool/Lite (message type)
$ 622 Configured recipe does not fit in the
recipe mailbox (greater than 256
data words).
$ 623
$ 624 No recipe entries exist.
$ 625 Invalid recipe number in the PLC
job
$ 626 No variables configured in the
recipe
$ 628 Recipe too long for the mailboxes
$ 629 LED image area too small
$ 630 Keyboard image area too small
$ 631 (Message with one variable)
1, 2
5, 6
8 to 20
25
$ 632 (Message with one variable)
1, 4
2
12
3, 6, 7,
8, 11, 13
$ 634 (Message with one variable)
18
0 to 8,
34
Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618
Action
Repeat download of configuration
Set required value by means of standard
screen or PLC
Configure recipe shorter or set up subsequent
recipe mailbox on line device
See Internal Errors
Configure recipe again.
Configure recipe again.
Configure recipe shorter.
Enlarge LED image area according to config-
ured bit offsets
Enlarge image area according to configured
bit offsets
Add to configuration and repeat download
Initiated alarm message
not configured
Initiated event message
not configured
Internal errors
Invalid field type
Add to configuration and repeat download
Information text not
available
Information text identi-
fier not available for
messages
Process screen does not
contain entries
Internal errors
Add to configuration and repeat download
Screen title or recipe title
not configured
Internal errors
System Messages
B-9