Avaya 3616 Installation And Configuration Manual page 39

Message
DHCP NACK error
DO NOT POWER
OFF
Duplicate IP
Erase Failed
Erasing Memory
Initializing ...
Internal Err. # #
Network Busy
555-301-107, Issue 1
July 2003
Description
A NACK (Negative ACKnowledge)
was received from the DHCP server
The Wireless Telephone is in a critical
section of the software update
The Wireless Telephone has detected
another device with its same IP
address
Download process failed to erase the
memory in the Wireless Telephone.
Wireless Telephone has determined
that a download should occur and is
erasing the current software from
memory.
The Wireless Telephone is performing
power on initialization
The Wireless Telephone has detected
a fault from which it cannot recover.
All APs are full or busy
3616/3626 Wireless IP Telephone
Installation and Configuration Guide
Action
The DHCP lease currently in use by
the Wireless Telephone is no longer
valid, which forces the Wireless
Telephone to restart. This problem
should resolve itself on the restart.
If it does not, the problem is in the
DHCP server.
None. Do not remove the battery or
attempt to power off the phone
while this is displayed. Doing so
may require the phone to be
returned to Avaya to be recovered.
If using DHCP, check that the
DHCP server is properly configured
to avoid duplicate addresses.
If using Static IP, check that the
Wireless Telephone was assigned a
unique address
Operation will retry but may
eventually report the error "int.
error: 0F" Power cycle the phone.
None. When the progress bar fills
the display line the erase operation
is complete.
Do not turn the Wireless Telephone
off during this operation.
None. This is informational only.
Record the error code so it can be
reported.
Turn the Wireless Telephone off
then on again.
If error persists, try registering a
different Wireless Telephone to this
telephone port.
If error still persists, contact Avaya
Technical Support and report the
error.
Try the call again later.
39