Avaya 3616 Installation And Configuration Manual page 21

* By default, WEP options are off. If WEP is desired, options must be set in the Wireless Telephone
that match those set in the APs.
Set each of these options to match exactly the settings in your APs.
Authentication
Select either
Open System
WEP
Select either
WEP Off
Key Information
Press the right arrow key to scroll through the options:
Default Key
1 through 4.
Key Length
use at this location.
Key 1-4
above. Press 0 and enter the encryption key as a sequence of hexadecimal characters.
(Use the
advance to the next digit, and the left arrow key to backspace.) For 40-bit keys you will
need to enter 10 digits, for 128-bit keys you will need to enter 26 digits. The display
will scroll as needed.
Encryption codes display as they are entered. For security reasons codes
will not display when a user returns to the Admin Menu, Encryption
options.
Note that WEP may be set to "optional" at the AP if there are wireless
devices in use that do not have WEP capability. All wireless devices must
be upgraded to WEP capability for a fully secured WEP environment.
555-301-107, Issue 1
July 2003
or
Shared Key
or .
WEP On
: Enter the key # specified for use by the Wireless Telephones. This will be
: Select either
40-bit
: Scroll to the key option that corresponds to the
and keys to access hexadecimal digits A-F, use the right arrow key to
2 3
3616/3626 Wireless IP Telephone
Installation and Configuration Guide
.
or depending on the key length specified for
128-bit
that was entered
Default Key
21