Avaya 3616 Installation And Configuration Manual page 10

3616/3626 Wireless IP Telephone
Installation and Configuration Guide
Although a single Ethernet switch network is recommended, the Wireless Telephones and the
Avaya Voice Priority Processor can operate in larger, more complex networks, including networks
with multiple Ethernet switches, routers, VLANs and/or multiple subnets. However, in such
networks, it is possible for the Quality of Service (QoS) features of the Avaya Voice Priority
Processor to be compromised and voice quality may suffer. Any network that consists of more than
a single Ethernet switch should be thoroughly tested to ensure any quality issues are detected.
Note that the 3616/3626 Wireless IP Telephones cannot "roam" from one subnet to another. If
routers and multiple subnets are in use, the Wireless Telephones must only use access points
attached to a single subnet, or be powered off and back on to switch to a different subnet.
•
– The wired-LAN desk sets provided by Avaya for use with the Avaya Call
Avaya IP Phone
Server.
•
– Required in the system to distribute software to the Wireless Telephones.
TFTP Server
The Avaya Voice Priority Processor and all access points must be on the
same subnet.
10 555-301-107, Issue 1
July 2003