Avaya 3616 Installation And Configuration Manual page 17

Admin Menu Items
IP Address
ESS ID
License Management
Restore Defaults
Site Survey Mode
Regulatory Domain
Encryption
Admin PW
Ext.
Password
IP Address
There are two modes in which the Wireless Telephone can operate: DHCP enabled or Static IP. Select
the mode for operation from the IP Address menu:
: will use Dynamic Host Configuration Protocol to assign an IP address each time
* Use DHCP
the Wireless Telephone is turned on. If DHCP is enabled, the Wireless Telephone also receives
all other IP address configuration from the DHCP server.
: allows you to manually set a fixed IP address. If selected, the Wireless Telephone
Static IP
will prompt for the IP addresses of each configurable network component. When entering
addresses, enter the digits only, including leading zeroes. No periods are required.
Regardless of the mode in which the Wireless Telephone is operating, the following components must
be configured:
555-301-107, Issue 1
July 2003
Installation and Configuration Guide
nd rd
2 Level 3
Use DHCP
Static IP Phone IP
TFTP Server IP
OAI Server IP
Default Gateway
Subnet Mask
Call Server IP
Call Server Port
AVPP IP
Static Entry
Learn Once
Learn Always
Set Current
Open System
Authentication
Shared Key
WEP On/Off
Default Key
Key Information Key Length
Key #
3616/3626 Wireless IP Telephone
Level
17