Data Download; Showroom Mode - Fisher & Paykel SMARTDRIVE Service Manual

5.4

Data Download

To activate the data download, enter the diagnostic mode with the power on at the supply point
press and hold the Lifestyles/Options
least 2 seconds, after which time two beeps will sound. Then press the Start/Pause
The LED above the Lifestyles button will be on and flickering.
Place the download pen over this LED and follow the instructions supplied with the data download
program.
5.5

Showroom Mode

Press and Hold START/PAUSE
Showroom mode will play the introduction and repeat it continuously, until the machine has been
isolated from the power supply.
To access the showroom mode follow the steps below.
1. Turn the power supply to the washing machine on.
2. During the introduction sequence on the LCD display (which lasts for approximately 1
minute) press and hold the START/PAUSE
these buttons for at least two seconds.
To exit, turn off the power supply to the washing machine at the wall.
and Select buttons. Keep the buttons pressed for at
LED for data download
, then press the SELECT
button and the SELECT
33
421827
button.
button
button, and hold