Data Download; Showroom Mode; User Warnings - Fisher & Paykel CleanSmart WL8060P1 Service Diagnostic Manual

Top load washing machine
Table of Contents

Advertisement

Restart/ Recycle features permanently programmed
It is possible for the Restart Feature to be disabled, or the Recycle Feature to be enabled, or a
combination of both to be permanently programmed into the memory of the electronics so that in the
event of a power cut the electronics will remember the setting.
If a machine is encountered with the Restart/Recycle features not set to the factory defaults as above,
the machine must be re-programmed using following steps:
Enter diagnostic mode: turn the power on at the power point and on at the console. Press and hold
the KEYLOCK and WASH TEMP buttons for at least 3 seconds.
Select the WOOL cycle and reset the restart and recycle to their default settings.

Data download

Turn the power on at the mains supply and on at the console.
Press and hold the 'Keylock and Wash temp' buttons for at least 3 seconds.
Then press the START/PAUSE button. The POWER button will be on and flickering.
Place the download pen over the 'Power LED' and follow the instructions supplied with the data
download program.

Showroom mode

This feature is designed for in store demonstration purposes. In this mode the machine cannot be
started.
To enter showroom mode:
CleanSmart
FabricSmart
WashSmart Eco
WashSmart
QuickSmart
Pressing the 'start/ pause' button for 3 seconds starts the national anthem.
The default anthem is New Zealand. This can be changed to Australia, USA or None.
To change the anthem, press and hold the Regular button for 3 seconds, there will be a single beep, the
anthem will have been changed.
Repeat until the appropriate anthem is selected.

User Warnings

There are a number of user warnings, which are generally caused by the user or poor installation. These
warnings should be able to be corrected by the user.
The machine signals user warnings by displaying a warning in plain text. Where multiple words are
displayed one word at a time with 1 second pause between changing from one word to the other along
with a rippling set of 5 beeps which are repeated every 6 seconds. This is the same tone that is heard
when the machine is first plugged into the mains power.
13
Keylock and wash boost
Keylock and water lever
Keylock and wash advance
Keylock and wash advance

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents