Table of Contents
Advertisement
flashes and then touch any other sensor field on the control panel.
Please note: The pause function can only be used for a maximum of
10 minutes. If the hob is not reactivated within this time then the hob
switches itself off.
The pause sensor can be used to restore the last-set cooking
settings if the on/off sensor (1) is accidentally activated and the hob
switched off during use. Simply switch the hob back on using the on/
off sensor (1) and press the pause function sensor (10). This feature is
only available for approximately 6 seconds after the hob has been
switched off. Once power has been restored the pause function LED
will flash to indicate that the previous settings can still be restored.
Keep Warm Function
Each zone is equipped with a keep warm function that is designed to
keep food at a stable temperature. This allows the serving of food to
be delayed and also for the melting of butter or chocolate.
•
A flat-bottomed pan must be used so that the temperature can be
accurately measured by the detector within the heating zone.
•
Due to the potential for the spread of bacteria it is not advisable to
keep food warm for too long. The keep warm function is limited to
use for only two hours at a time to keep food as safe as possible.
•
There are three temperature levels that can be set: 42°C, 70°C and
94°C.
15
Advertisement
Table of Contents
