Table of Contents
Advertisement
Timer/Minute Minder
The hob is equipped with a timer that allows a finish time to be set
for the end of cooking on any zone, between a minimum of 1 minute
and a maximum of 99 minutes. This timer can be used separately for
each zone, and an LED will indicate the zone positions for each of the
active timers. Once the timers are set, the timer display will show the
time remaining on the first zone to finish cooking. In normal use, the
timer ending prompts the zone heating to end as well. However the
timer can also be used as a minute minder to count down time without
halting heating.
Please note: A decimal point next to the timer display will indicate that
the minutes are ready to be set.
To set the timer
•
First switch on the hob if necessary and set the desired zone to the
power level required.
•
Touch the timer "+" and "-" sensors (5 and 6) simultaneously. This
will activate the minute minder. Touch the timer "+" and "-" sensors
(5 and 6) simultaneously again to switch to the zone timer function.
If multiple zones are in use then you will need to touch the "+" and
"-" simultaneously and repeatedly to cycle through the zones until
the timer LED indicating the desired zone is flashing.
•
The timed zone LEDs are oriented in a similar way to the zones;
12
Advertisement
Table of Contents
