Coffee Thermoblock Cleaning - Sunbeam TORINO User Manual

Coffee Thermoblock Cleaning

Deposits of coffee oils build up over time and
affect the taste of the coffee and operation
of the espresso machine. Therefore the
group head will require regular cleaning. It is
recommended that the group head is cleaned
at a minimum every 3 months, however this
will vary depending on the frequency of use.
You can use the cleaning cycle when you
wish. The Torino will also remind you when
a cleaning cycle is required by displaying
CLEAN on the LCD panel. You can adjust the
frequency of the cleaning cycle reminder, see
Advanced Programming section.
When the Torino requires a cleaning cycle,
CLEAN will appear on the LCD display.
NOTE: During the cleaning cycle all other
espresso machine operations will be locked
until the cleaning cycle is completed. Should
the cleaning cycle be accidentally started
it can be cancelled by switching the power
'OFF' at the power outlet, or by pressing the
POWER button on the machine.
Before starting the coffee cleaning cycle
1. Remove the water reservoir and rinse
clean. Completely fill with fresh water
and replace.
28
2. Use the cleaning disc. Lift the reservoir
cover. The disc is located to the left of
the reservoir. Fit the group handle with
the double filter basket.
3. Position the cleaning disc into the double
filter basket.
4. Place a Sunbeam Espresso Machine
Cleaning Tablet (EM0020) on top
of the cleaning disc.
Note: Cleaning and Descaling Tablets are not
interchangeable as they are made of different
ingredients.
Double filter
basket