Sunbeam TORINO User Manual page 34

Hide thumbs Also See for TORINO:
Table of Contents

Advertisement

Steam Thermoblock Descaling continued
4. Immediately press PROGRAM button
(whilst St Clean is still on the LCD
display) to start the steam clean cycle.
5. Purge the machine with clean water. Turn
the steam dial on and allow water to run
for 30-60 seconds, then turn off.
6. Pull out the water reservoir.
7. Place one (1) Sunbeam Espresso
Machine Descaling Tablet (EM0010)
into the water reservoir. Once tablet
is dissolved, replace reservoir into the
machine.
Note: Cleaning and Descaling Tablets are not
interchangeable as they are made of different
ingredients.
8. Turn steam dial on, and recommence
the steam clean function. Allow machine
to run for about 7 minutes, or until the
water runs out.
9. Turn steam dial off.
10. Remove water reservoir and pour out
any remaining liquid. Wash and fill with
fresh water. Replace reservoir into the
machine.
11. Purge the machine with clean water. Turn
the steam dial on and allow water to run
for 30-60 seconds, then turn off. Allow
the machine to run for about 2 minutes.
32
12. Turn steam dial off when complete.
13. Press the CLEAN button for a few
seconds, and the machine will return to
READY mode on the LCD display.
NOTE: If CLEAN still appears on the LCD display
after the Steam thermoblock descaling cycle is
finished, then the Torino also requires cleaning
using the Coffee thermoblock clean cycle. See
Coffee Thermoblock Cleaning section.
14. Remove the large container/ bowl from
under the steam wand.
15. The machine is now ready for use.

Advertisement

Table of Contents
loading

Table of Contents