Operating Your Torino Precision Grinder - Sunbeam TORINO User Manual

Operating your Torino
Precision Grinder
Before using the coffee grinder, wipe the
base exterior with a damp cloth. Wash the
bean hopper and hopper lid in warm soapy
water, then rinse and dry thoroughly.
Note: Do not immerse the grind cartridge in
water or any other liquid.
Note: Do not place any parts of the coffee
grinder in the dishwasher.
1. Place the coffee grinder on a dry, level
surface.
2. To attach the bean hopper, align the arrow
on the hopper with the arrow on the top of
the grind cartridge and turn clockwise to
lock. See figure 1.
The grinder will not function without the
hopper in place.
Figure 1
3. Fill the bean hopper with coffee beans.
Tip: To maintain an even weight bearing down
on the burrs, we recommend keeping the
hopper at least half full. This ensures a more
consistent grind is achieved.
Note: This coffee grinder is intended to grind
whole coffee beans only.
4. Place the hopper lid onto the bean hopper
and open the hopper closure arm.
8
5. Ensure operation dial is off, plug the power
cord into a 230-240V AC power outlet and
switch the power on.
6. Select the grind by turning the grind
adjustment collar to the desired setting,
see figure 2.
Refer to the grind setting table on page 11 to
assist you in selecting the correct grind level
for the desired brewing method.
Figure 2