Sunbeam TORINO User Manual page 31

Coffee Thermoblock Cleaning continued
5. Place group handle onto the group head.
6. Place a sufficiently large container or
bowl under both pouring spouts.
Starting the coffee cleaning cycle
If CLEAN appears on the LCD display, go to
Step 3 below.
1. Insert the power cord into a 230-240V
AC power outlet and switch the power
'ON'.
2. Press the POWER button on the espresso
machine to turn on. Wait until READY
appears on the LCD display.
3. Press CLEAN button once (1) to choose
Coffee Clean (Co Clean) function on the
LCD display.
4. Immediately press PROGRAM button
(whilst Co Clean is still on the LCD
display) to start the coffee clean cycle.
5. There will be a pause, then water will
slowly will cycle on and off through the
machine for several minutes.
6. After the coffee clean cycle is completed,
the machine will return to READY mode
on the LCD display.
Note: If CLEAN still appears on the LCD display
after the Coffee thermoblock clean cycle is
finished, then the Torino also requires descaling
using the Steam thermoblock clean cycle. See
Steam Thermoblock Descaling section.
29