Advertisement
How to clean your Iced + Hot
Machine
Minerals (like calcium and limestone) found
in water can leave deposits in your machine
and affect its performance. Decalcifying your
machine is an important part of ensuring your
coffee always tastes great!
We recommend decalcifying your machine
once per month to keep it at peak
performance. It's an easy process – See steps
below.
Sunbeam Eco-friendly descaling sachets
(EMA0015CL) are available for purchase from
Sunbeam.
Contact details are on the back page.
1. Dissolve half the contents of a Sunbeam
Descaler sachet in 450ml of warm water.
Pour the solution into the water reservoir.
Fold the sachet (containing the remaining
descaler) up tightly and store for next use.
2. Place the reusable coffee filter into the
brew basket and close the lid.
3. Place the tumbler under the spout and
press the HOT BREW button to run a
brew cycle.
4. When the descaling solution begins to
pour through the brew spout, press the
HOT BREW button again to stop the pour.
Leave the descaling solution in the Iced +
Hot machine for 1 minute. Then press the
HOT BREW button to resume the pour.
5. When the brew cycle has completed,
discard the contents of the tumbler.
Remove the reusable coffee filter from the
brew basket.
6. Rinse out the tumbler, reusable coffee
filter and brew basket with clean water.
7. Place tumbler under spout.
8. Fill the water reservoir to the 475ml mark
with clean water, and press the HOT
BREW button to run a brew cycle.
9. When the brew cycle has completed,
discard the contents of the tumbler and
rinse tumbler thoroughly with clean water.
10. Repeat steps 7-9 one more time, to
ensure the machine is thoroughly rinsed.
Your Iced + Hot machine is now clean and
ready to brew delicious Iced or Hot coffee
whenever you need a pick-me-up!
DISHWASHER SAFE PARTS OF YOUR ICED
COFFEE MACHINE
To thoroughly clean your Iced + Hot coffee
machine, you can put the following parts into
the top rack of the dishwasher:
1. Reusable coffee filter
2. Brew Basket
CAUTION: THE ELECTRICAL BASE, POWER
CORD AND PLUG ARE NOT DISHWASHER
SAFE AND SHOULD NEVER BE IMMERSED
IN WATER OR OTHER LIQUIDS.
5
Advertisement
