Operation
Program sequence
Once started, the program proceeds
automatically.
As it proceeds, the program steps are
shown on the display.
Detailed information on the program
sequences is available in the
Programming Manual.
,
Do not change the printer paper
roll or ribbon cartridge when a
program is running.
End of program
^ Once the program ends, you will see
Programme finished
Turning off
^ Press the s button.
If the machine is to be left off for
several days, be sure to turn the main
switch to 0 OFF.
48
in the display.
Cancelling a program
A program can only be interrupted
or cancelled in operating levels B
and D.
In operating levels B or D
^ Press the +C button.
The program is interrupted.
The following prompts appear in the
display:
Cancel programme (OK)
or continue (Clear)?
,
In cases involving mandatory
decontamination, disinfectant must
be added to the contaminated water
before it can be released into the
public sewer system. The door on
the unclean side can be opened for
this purpose.
^ Confirm program cancellation with
the OK button.
Programme cancelled
Water drainage
display.
After the water has drained away, the
program list is displayed again.
,
appears in the