Barcode Scan With Conveyor Belt Connected; User Scan Load; User Scan Cancel Load - Miele PG 8527 Operating Instructions Manual

Barcode scan with conveyor belt connected.

User scan Load

User scan Cancel load

If a conveyor belt is connected to the washer-disinfector, only
loading packages that have already been scanned are
processed on operating level C.
,
The sequence of loading packages in the Profitronic
must match that of the mobile units on the feeder belt.
At the end of the program, the message
achieved
appears and the completed program package is
deleted.
If the program is cancelled or if an error occurs during the
Process parameters not achieved
program run (
processed loading package is not deleted. When restarted
after correcting the error, the program is run again.
If processing of the loading package does not need to be
repeated after cancellation of a program, it must be
deleted manually.
Scan loading operator
When
message is displayed after program selection (immediately in
the case of automatic mobile unit recognition in operating
level C):
Scan operator
Once the user barcode has been scanned, the program can
be started.
Scan the load
When
scan the load after the user scan.
User scan Load can be cancelled using the +C key. The
program overview is displayed again.
Barcode scanner (optional)
is activated, the following
is also activated, you are prompted to
Process parameters
), the last
51