Plumbing - Miele PG 8527 Operating Instructions Manual

Water connection
This washer-disinfector must be
connected to the water supply in
accordance with all national and
local plumbing codes. Please refer
to the installation diagram supplied
with the machine.
,
Water in the
washer-disinfector is not suitable
for drinking.
If the water supply has a high iron
content there is a danger of corrosion
occurring on items being processed in
the machine, as well as in the machine
itself.
If the chloride content of the water
exceeds 100 mg/l the risk of corrosion
to items being processed in the
machine will be further increased.
The washer-disinfector is designed so
that it may be connected to a water
supply without an extra non-return
valve, unless required by code.
Taps and drain connections should be
situated as close to the
washer-disinfector as possible, and be
easily accessible.
The machine is designed for
connection to cold, hot and DI water.
If there is no hot water supply, the
intake valve for the warm water
connection should be connected to the
cold water supply.
Refer to the Installation Diagram for
more information.
Large area filters, supplied with the
machine, are to be installed in the hose
attached to the water supply.
,
Do not shorten or damage the
hoses!
Do not remove the filters in the
hoses.

Plumbing

71