Paging; Chime Paging - Aiphone IS SERIES Operation Manual

Paging

The system allows you to page (transmit an announcement)
the selected zone(s) and/or station(s) simultaneously.
NOTE:
If you use zones, register zones in the System setting on a PC in
advance.
1
Search for and select the zone you want to page (so
that it is highlighted) in one of the search methods.
(→P. 25-30)
You can select up to 5 zones and/or stations for paging.
*
(→P. 27)
2
To set the priority (when "[
displayed), press ZOOM/WIDE , and then press
to select the target priority (so that it is highlighted).
If you will not set the priority, skip this step and press
*
TALK or lift the handset. You can start paging after a
tone.
3
Press TALK or ZOOM/WIDE , or lift the handset
(when "[ ] [ ] PAGE" is displayed).
or
Handset
4 After a tone rings, start paging.
5 A receiver can answer it and communicate with you
by pressing TALK or lifting the handset, or pressing
the external call button*
When the priority is set to "
*
can answer the paging.
The paging will be heard in priority to any other
performances (of lower priority) including ongoing
communications between stations. (→P. 20)
6
When you have fi nished paging, press
up the handset.
*1: Connected to a room sub station and the necessary setting
should be made in the System setting on a PC. (Be careful
not to press the call button on a room sub station by
mistake.)
] PRIORITY" is
or
1
.
BROADCAST", no receiver
OFF or hang

Chime paging

The system allows you to make chime paging (transmit
a chime) to all the stations in the designated zone(s)
simultaneously.
NOTE:
If you use zones, register zones in the System setting on a PC in
advance.
1 Search for and select the zone you want to make
chime paging (so that it is highlighted) in one of the
search methods. (→P. 29, 30)
You can select up to 5 zones for chime paging.
*
If you have selected the target zone (so that it is
*
highlighted) by using a speed dial button, then skip to
step 4.
2 TALK or ZOOM/WIDE (when "[
Press
SOUND" is displayed).
3
Press to select the sound source of chime from
the list (so that it is highlighted).
4
To set the priority (when "[
PRIORITY" is displayed), press ZOOM/WIDE , and
then press to select the target priority (so that it
is highlighted).
If you will not set the priority, skip this step and press
*
TALK
or lift the handset. Chime paging begins.
(Chime paging begins after a ring of tone when the target
zone is other than the zone you belongs.)
5
Press TALK or ZOOM/WIDE , or lift the handset
(when "[ ] [ ] CHIME" is displayed).
Chime paging begins.
or
Handset
Making chime paging automatically
You can also set chime page automatically on a preset
schedule in the System setting on a PC.
(→P. 27)
] [ ] PLAY
] CHIME [ ]
or
33