Table of Contents
Advertisement
Projector parts and functions
WIRED REMOTE
Receives input signal from compatible Niles or Xantech IR
repeater systems.
12V TRIGGER
(3.5-mm, mini phone jack)
Offers 12 (+/- 1.5) V of output for 350mA monitor relay
with short circuit protection.
RS-232
9-pin D-sub socket. Connects your PC or
automatic home theater /control system.
10/100 BASE-T
Connects the projector to
your PC via network to enable
direct control of the projector
on your PC.
10/100 BASE-T
IN
OUT
SDI / HDSDI / 3G
SDI/HDSDI/3G
IN/OUT
Serial digital interface, use
BNC connects input or output
the image.
HDMI 1 & 2
HDCP compatible digital image input; connects
to sources using HDMI or DVI.
VGA
Standard 15-pin VGA connection socket to connect to RGB, high-
definition component input or PC. The projector will automatically
detect the resolution of the input signal.
IO Control
(Input / Input control panel)
12
12V TRIGGER
RS-232
wired remote
I
II
350mA
VGA
HDMI
HDMI
COMPONENT 1
Standard and high definition (480i/480p/
576i/576p/720p/1080i/1080p) component input,
connects to DVD/HD-DVD/BD player, HD set-
top-box or other SD/HD input source.
SYNC IN
From source equipment for informing which
field of signal is the Left-eye or Right-eye signal.
SYNC OUT
From projector and be connected to the 3D
SYNC wireless transmitter for synchronizing
the projected image with the 3D glasses.
COMPONENT 1
Y
Pb
Pr
G/Y
B/Pb
R/Pr
H
COMPONENT 2
COMPONENT2
Connects to the five BNC inputs for
component (YPbPr) image source and
channel (Hs, Vs) source.
STEREO DVI
Use this DVI dual link to connect to a stereo 3D
source – it is usually a computer with 3D Graphics
card, and 3D applications.
SYNC IN
SYNC OUT
V
STEREO DVI
Advertisement
Table of Contents
