Projector Parts And Functions - Hitachi CP-WU13K User Manual

Projector parts and functions

Front view
Infrared receiver
Lens
Ventilation inlet
The internal cooling fan draws cool
air from the ventilation inlet into the
projector.
Rear view
Power switch
I → ON
O → OFF
Voltage Selector
(Default at 110V)
Power inlet
Adjustable foot
Adjustable foot
POWER ON LED
Displays the projector's power status
ERROR (LED)
Displays the cause of problem (i.e.
temperature, fan, lamp or system) that
has led to projector malfunction.
Refer to " Page 58 : LED STATUS ".
for the detail display information.
▲ ▼ buttons
Use these buttons to scroll, configure
or adjust items on the OSD or toggle
between different images.
STANDBY (LED)
The indicator that shows the projector's
.
standby status
Projector parts and functions
ON MENU
ERROR
LED
STATUS
ENTER
STANDBY
INPUT
Ventilation slot
The hot air generated
inside the projector is
dispersed through the
ventilation slot. Make
sure the ventilation slot is
free from obstruction.
Adjustable foot
Adjust the height and angle of the
projector with the adjustable foot
Projector Keypad
Infrared sensor
MENU
Displays or hides the OSD adjustment
screen
ENTER
Press this button to confirm selection of
OSD item; you can choose from "Select
Item" or access "Sub Menu" configurations.
(Standby)
Use this button to start up or shut down the
.
projector
INPUT
Used to toggle between different input
signal source
Refer to " Page 10 : Input Selection ". for
more details
11