Connecting The Projector To Other Devices; V Trigger Connection - Hitachi CP-WU13K User Manual

Connecting the projector to other devices

HDMI / DVI connection
Signals from image source offer the best projection image quality when sent through HDMI.
Therefore, try to use input devices with HDMI output as the source of image.
10/100 BASE-T
IN OUT
HDMI
SDI / HDSDI / 3G

12V Trigger connection

If your home theatre system includes a projector screen, screen cover or other 12V Trigger equipment,
please connect such device/equipment to the projector's 12V Trigger output as illustrated. After you
have done so,
Your screen will lower automatically whenever you turn on your projector for your convenience.
Retractable screen or other
12V device
10/100 BASE-T
IN OUT
SDI / HDSDI / 3G
12V TRIGGER
RS-232 WIRED REMOTE
I 350mA II
VGA G/Y
HDMI
HDMI/DVI input source
(BD/HD-DVD/DVD player, HD set-top-box,
gaming consoles and so forth)
Sleeve = Ground
12V TRIGGER
Tip = +12V
RS-232
350mA
I
HDMI  HDMI 
Installation of the Projector
COMPONENT 1
SYNC IN
Y Pb Pr
B/Pb R/Pr H V
COMPONENT 2
WIRED REMOTE
Y
II
VGA G/Y B/Pb R/Pr
COMPONENT 2
SYNC OUT
STEREO DVI
COMPONENT 1
SYNC IN
Pb Pr
H V STEREO DVI
10/100 BASE-T RS-232 I 350mA 12V TRIGGER WIRED REMOTE II COMPONENT 1 Y Pb Pr SYNC IN SYNC OUT

IN OUT Desk Top or Notebook HDMI  HDMI  VGA G/Y B/Pb R/Pr H V STEREO DVI
SDI / HDSDI / 3G COMPONENT 2
連接至牆壁插座
AC SWITCH
50/60Hz 100-240 Volts AC MAINS
SYNC OUT
21