Table of Contents
Advertisement
OSD Menu description
Trigger1 ~2
The projector comes with two sets of Trigger output. You can configure two different devices
connected to the projector via the trigger ports to be automatically turned on when the projector is on.
There will be a 2-3 second delay prior to activation to prevent operation of this function when the user
is choosing the desired aspect ratio.
5:4
Outputs 12V of power on Trigger1 or 2 when the user chooses the 5:4 aspect ratio.
4:3
Outputs 12V of power on Trigger1 or 2 when the user chooses the 4:3 aspect ratio.
16:10
Outputs 12V of power on Trigger1 or 2 when the user chooses the 16:10 aspect ratio.
16:9
Outputs 12V of power on Trigger1 or 2 when the user chooses the 16:9 aspect ratio.
1.88
Outputs 12V of power on Trigger1 or 2 when the user chooses the 1.88 aspect ratio.
2.35
Outputs 12V of power on Trigger1 or 2 when the user chooses the 2.35 aspect ratio.
Letterbox
Native Outputs 12V of power on Trigger1 or 2 when the user chooses the native aspect ratio.
Auto
Outputs 12V of power on Trigger 1 or 2 when the projector is turned on.
Auto Source
Select this function to active the projector automatically search input Imaging.
ON: default setting. By enabling this function, the projector will automatically determine the source
of input every time it is turned on so that the user will not have to make the selection on the OSD
Menu.
Setting the function off will require the user to specify source of image input on the OSD Menu in
order for the projector to display the intended image.
This function is not available when the input source is Stereo-DVI.
Language
You can use this function to select the language you wish for the OSD Menu to be displayed in. You
can choose from the following nine languages:
English, French, Spanish, German, Portuguese, Simplified Chinese, Traditional Chinese, Japanese
and Korean.
52
Outputs 12V of power on Trigger1 or 2 when the user chooses the Letterbox aspect
ratio.
Advertisement
Table of Contents
