Video Output - Teac SDB420 Owner's Manual

Menu Operation

2. VIDEO Output

Select VIDEO Output mode : Composite Video or RGB or S-VHS or Component.
Note : Your selection will control only the output from SCART
What is Composite Video?
It is simply the normal video signal you would expect from an AV output.
What is RGB?
The RGB selection is the factory default.
The RGB selection will allow the best picture quality from your digital receiver.
This feature will only work if your television supports RGB input and the SCART to
SCART cable MUST be used.
What is S-VHS?
The S-VHS delivers signal with each separate Chromaticity & Luminance to make better
quality of color. Special Scart to S-VHS adaptor is required and not supplied with the
product.
What is Component YPbPr?
The Component selection(or sometimes called DVD input) may be available on some TVs.
Simply connect a 3 colored lead from YPbPr to your TV component input. Be sure to select
it on your TV remote controller.
SDB420
- 23 -
Digital Terrestrial Receiver