Table of Contents
Advertisement
3. Remove the filter canister and clean the mounting
surface.
4. Lubricate the gasket on the filter canister with clean
oil.
5. Install the filter canister by hand until the gasket
contacts mounting surface, then rotate it an
additional 1/2 turn.
6. Tighten the drain plug on the bottom of the filter
canister.
Electrical System
Maintenance
Fuses
The fuses for the machine's electrical system are
located under the center of the dash panel (Figure 42
& Figure 43).
1. Fuses
39
Figure 42
Figure 43
Advertisement
Table of Contents
