Erasing The Programmed Command From One Button; Erasing All The Commands Programmed Under A Mode Button - Onkyo DR-C500 Instruction Manual

Controlling other components connected to
the DVD Changer Receiver
Erasing the programmed command
from one button
You can only erase memorized commands and not preset ones.
1
Press and hold down the desired
MODE button for the command,
MODE
DVD RCVR / VCR T V CBL / SAT press the ENTER button, and then
release both buttons.
When you press the MODE button, the
SEND/LEARN indicator lights. When you
press the ENTER button, the lamp turns
ENTER
off. When you release the buttons, the
lamp lights again.
2
Press and release the button for the
command you wish to erase.
When you press the button, the SEND/
LEARN indicator turns off. When you
release the button, the lamp lights
again.
3
Press and release the same button
again.
The SEND/LEARN indicator flashes twice
slowly. The memorized command is
erased.
Note
• If no button is pressed for more than 30 seconds during the
erasing procedure, the remote controller exits the erasing mode.
Resume from Step 1.
62
Erasing all the commands
programmed under a MODE button
1
Press and hold down the desired
MODE button, press the ENTER
MODE
DVD RCVR / VCR T V CBL / SAT button twice, and then release both
buttons.
When you press the MODE button, the
SEND/LEARN indicator lights. When you
press the ENTER button, the lamp turns off.
ENTER When you release the buttons, the lamp
lights again.
2
Press and release the same MODE
button again.
When you release the button, the SEND/
LEARN indicator flashes twice slowly.
This erases all the commands
memorized to the MODE button.
Notes
• If no button is pressed for more than 30 seconds during the
erasing procedure, the remote controller exits the erasing mode.
Resume from Step 1.
• If you perform an invalid operation during erasing, the SEND/
LEARN indicator flashes three times quickly, and the remote
controller exits the erasing mode. Resume from Step 1.
• If many commands have been programmed to the MODE button,
then the SEND/LEARN indicator may remain lit for up to 20
seconds during Step 2. This is not a malfunction.
SEND/LEARN
B
SEND / LEARN
indicator
LIGHT
MODE
MODE buttons
DVD RCVR / VCR T V CBL / SAT
INPUT
DIMMER SLEEP
1 2 3
PRESET
4 5 6
MASTER
VOLUME
7 8 9
T
-- / ---
MEM 0 CLR
VOLUME
CH UP CH
– +
TOP MENU MENU
ENTER
ENTER
TV / VCR
RETURN DOWN ON SCREEN
PLAY PLAY
SP A SP B FM MODE SURROUND
SLOW STEP PRGV DISC
ACOUSTIC LATE
SP SETUP IPM
CONTROL NIGHT
AUDIO ANGLE SUBTITLE ZOOM
SW MODE T.TONE CH SEL DISTANCE
RC- 504 M