Speaker Setup - Onkyo DR-C500 Instruction Manual

Speaker Setup

You need to set up the speaker configuration for the speaker
system connected to the FRONT SPEAKERS A connectors.
Notes
• Speaker setup cannot be done if;
– Headphones are connected, or
– The FRONT SPEAKERS B system is On (see page 31).
• It is not necessary to set the parameters again once you have
completed the setup unless you change the speaker configuration.
Selecting the number of speaker
channels
1
Press SP A to select "SP A."
Remote
controller only
SP A
SLOW
Note
The unit must be set to "SP A" for the following
operations.
2
Press SP SETUP repeatedly to
select the number of channels for
SP SETUP
the Speaker A system.
Speaker configuration indicators indicate
current speaker configuration.
Speaker Position: Indicates the position of a
Input format:
Output format:
Pressing the button repeatedly within three
seconds changes the number of channels
as follows (the corresponding speaker
configuration is described in parentheses):
→
24 24
Speaker Position
Input format
Output format
selected channel.
Lights when a signal is input
for that channel.
Lights when a signal is
output for that channel.
Speaker 5
ch
(Front left, center, and right,
plus surround left and right
speakers)
↓
Speaker 2
ch
(Front left and right speakers)
↓
Speaker 3
ch
(Front left, center, and right
speakers)
↓
Speaker 4
ch
(Front left and right, plus
surround left and right speakers)
Before operating the
remote controller
Press MODE RCVR/VCR.
RCVR / VCR
The remote controller
remains in the RCVR/VCR
mode, until another MODE
button is pressed.
The normal display resumes in three
seconds.
Speaker configuration indicator in the
lower right corner shows the current
speaker configuration.
Note
• To check the present setting while the normal display is
displayed, press SP SETUP once. To change the setting, press
the button repeatedly within three seconds.
Selecting the Subwoofer mode
Press SW MODE on the remote
Remote controller
controller.
SW indicator lights up when SW Mode 1, SW
Mode 2 or SW Mode 3 is selected.
SW MODE
With the first press of the button, you can
check the present setting. Then each
press of the button changes the subwoofer
mode as follows (a tip on how to select the
right subwoofer mode is in parentheses):
SW MODE 1
→
(When small–with limited bass signal
handling–front speakers are
connected)
SW MODE 2
(When large–wideband–front speakers
are connected)
SW MODE 3
(When large–wideband speakers are
connected to all channel)
SW Off
(When no subwoofer is connected)
The initial setting is SW MODE 1.
B
SEND / LEARN
DVD RCVR / VCR
INPUT
1 2
4 5
7 8
-- / ---
MEM 0
VOLUME
CH
–
TOP MENU
RETURN
SP A SP B
SP A
SLOW STEP
ACOUSTIC
SP SETUP IPM
SP SETUP
AUDIO ANGLE SUBTITLE ZOOM
SW MODE
SW MODE T.TONE CH SEL DISTANCE
RC-
↓
↓
↓
LIGHT
MODE
T V CBL / SAT
DIMMER SLEEP
3
PRESET
6
MASTER
VOLUME
9
T
CLR
UP CH
+
MENU
ENTER
TV / VCR
DOWN ON SCREEN
PLAY PLAY
FM MODE SURROUND
PRGV DISC
LATE
CONTROL NIGHT
504 M