Stopping Playback; When An Operation Is Prohibited - Onkyo DR-C500 Instruction Manual

Basic Playback
DVD
VCD CD MP3

Stopping Playback

1
Press 7.
Remote
When you press £/8 on the unit or £ on
controller
the remote controller to restart playback,
playback starts from the location where
you stopped playback because the
location index is stored in memory.
Notes
• The location where playback resumes may
vary depending on the disc or the scene
Unit
where you stopped.
• Resume playback is not available for MP3
discs.
Resuming playback from the beginning
Press 7 again after stopping playback to
clear the location index memory, then
press £/8 to start playback. Playback
starts from the beginning of the disc.
DVD VCD CD MP3
To Pause Playback (Still mode)
Remote
Press 8 on the remote controller or
controller
£/8 on the unit during playback.
To start playback press £ on the remote
controller or £/8 on the unit.
Unit
34
DVD
VCD CD MP3
To Select a Disc
Press one of the DISC 1 to DISC 5 buttons or press DISC
SKIP repeatedly.
DVD
VCD
Progressive Scan Function
1
Press PRGV to display Progressive
or Interlaced icon on TV.
Remote controller
only
FM MODE
PRGV
2
Press PRGV again while displayed
to switch between Progressive and
FM MODE
Interlaced.
PRGV
Notes
• When component video is connected, you can use Progressive
scan. Progressive scan is not available if S-Video or Composite
video is connected.
• If you connect a TV that is not compatible with a progressive scan
signal and choose "Progressive", the picture may be distorted. Be
sure to choose "Interlaced" if your TV is connected using either the
Composite or S-Video terminals.
DVD VCD

When an operation is prohibited

There are times when you are using the DVD Changer
Receiver and attempt to perform an operation, but for some
reason it cannot be performed. When this occurs,
on the screen.
appears