Maintenance; Recommended Maintenance Schedule - Toro 08884 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service
Interval
After first 8 hours
Before each use or
daily
Every 25 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours or
annually, whichever
occurs first
Every 800 hours
Every 1500 hours or 2
years, whichever occurs
first
Important
Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
• Change the engine oil and filter.
• Torque the wheel lug nuts.
• Change the hydraulic oil filter.
• Check the operation of the interlock switches.
• Check the engine oil level.
• Check the hydraulic fluid level.
• Check the tire pressure.
• Check the condition of the hydraulic .
• Inspect and clean the machine.
• Check the battery fluid level.
• Check the battery cable connections.
• Lubricate the front wheel bearing.
• Lubricate the traction control linkage.
• Change the engine oil and filter.
• Inspect the remote air filter element.
• Inspect the engine air filter element.
• Lubricate the steering shaft grease fitting.
• Check the steering chain adjustment.
• Torque the wheel lug nuts.
• Replace the remote air filter element.
• Replace the engine air filter element.
• Change the hydraulic oil.
• Replace the hydraulic oil filter.
• Replace the spark plugs.
• Replace the fuel filter.
• Decarbon the combustion chamber.
• Adjust the valves and torque head.
• Check the engine RPM (at idle and full throttle).
• Drain and clean the fuel tank.
• Replace moving hoses.
18