Safety; Maintenance And Service - Toro Reelmaster 5010-H Diagnostic Manual

Safety

The machine has been tested and certified by Toro for compliance with existing safety standards and
specifications. Improper use or maintenance of the machine can result in injury or death. To reduce the
potential for injury or death, comply with all of the safety instructions found in the 5010-H Operator's Manual and
the following specific service-related precautions:

Maintenance and Service

•
Before servicing or making any adjustments to the machine, set the parking brake, turn the key to the O
position, and remove the key from the ignition switch. Wait for all of the machine motion to stop. Refer to
Preparing for Troubleshooting and/or Testing (page
•
Keep all nuts, bolts, screws, and belts properly tightened.
•
To reduce any potential fire hazard, keep all electrical connectors, cutting units, and drive components
free of debris.
•
Wear cut-resistant or heavy leather gloves and use caution when checking or servicing the cutting units.
•
If you must perform maintenance or make an adjustment with the engine running, keep your hands, feet,
clothing, and all parts of your body away from the cutting units and all other moving parts.
•
At the time of manufacture, the machine conformed to all applicable safety standards. To ensure optimum
performance and continued safety certification of the machine, use only genuine Toro replacement parts
and accessories.
22).
7
FF