Operation; Operating The Cargo Box - Toro 07383 Operator's Manual

Operation

Note: Determine the left and right sides of the machine
from the normal operating position.
CAUTION
Before servicing or making adjustments to the
machine, shut off the engine, set the parking brake,
and remove the key from the switch. Remove any
load material from the bed or other attachment
before working under a raised bed. Never work
under a raised bed without positioning the safety
support on a fully extended cylinder rod.

Operating the Cargo Box

Note: If possible, center loads in the cargo box.
Note: Remove all cargo from the box before lifting the box
up to service the machine.
Raising the Cargo Box
WARNING
Driving the machine with the cargo box raised may
cause the machine to tip or roll easier. The box
structure may become damaged if you operate the
machine with the box raised.
• Only operate the machine when the cargo box
is down.
• After emptying the cargo box, lower it.
CAUTION
If a load is concentrated near the back of the cargo
box when you release the latches, the box may
unexpectedly tip open injuring you or bystanders.
• Center loads in the cargo box if possible.
• Hold the cargo box down and ensure that no
one is leaning over the box or standing behind it
when releasing the latches.
• Remove all cargo from the box before lifting the
box up to service the machine.
Move the lever rearward to raise the cargo box
1. Cargo-box lever
Lowering the Box
WARNING
The weight of the box may be heavy. Hands or
other body parts could be crushed.
Keep hands and other body parts clear when
lowering the box.
Move the lever forward to lower the cargo box
Opening the Tailgate
1. Ensure that the cargo box is lowered completely.
2. Open the latches on the left and right side of the cargo
box and lower the tailgate
(Figure 12).
19
Figure 12
(Figure
(Figure 13).
12).