Securing The Access Point; Using A Security Cable - Cisco Aironet 1130AG Hardware Installation Manual

Chapter 2 Installing the Access Point

Securing the Access Point

There are two ways to secure your access point:
•
•

Using a Security Cable

You can secure the access point by installing a standard security cable (such as the Kensington Notebook
MicroSaver, model number 64068) into the access point security cable slot (see
cable can be used with any of the mounting methods described in this guide.
Figure 2-11
1
2
Follow these steps to install the security cable.
Step 1 Loop the security cable around a nearby immovable object.
Insert the key into the security cable lock.
Step 2
Insert the security cable latch into the security cable slot on the access point.
Step 3
Rotate the key right or left to secure the security cable lock to the access point.
Step 4
Remove the key.
Step 5
OL-6226-02
Using a security cable
Securing the access point to the mounting plate
Security Cable Slot
1
2
Access point cover
Cable access notch
3
3 Security cable slot
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide

Securing the Access Point

Figure 2-5). The security
2-17