Securing The Access Point; Using A Security Cable - Cisco 521 Manual

Step 5 Slightly rotate the access point from side-to-side until you hear the
second keyhole clip falling into the other keyhole that is located on
the opposite end of the access point and not visible.
Step 6
Slide the access point back over the keyhole clips. You will hear a
click when the locking detent contacts the access point and locks it
into place.

Securing the Access Point

There are two ways you can secure your access point:
•

Using a security cable

•
Securing the access point to the mounting plate
Using a Security Cable
You can secure the access point by installing a standard security cable (such
as the Kensington Notebook MicroSaver, model number 64068) into the
access point security cable slot. The security cable can be used with any of
the mounting methods described in this guide.
24
OL-16715-01