Cisco Aironet 1130AG Hardware Installation Manual page 34

Before Beginning the Installation
The mounting plate features are described below:
Keyhole clips—used to attach the access point to the mounting plate. The keyhole clips slide into
•
the keyhole slots on the bottom of the access point.
Screw holes (A, B, C)—used to attach the suspended ceiling adjustable T-rail clips.
•
Screw hole (X)—used to attach the mounting plate to a network cable box, wall, or ceiling. The
•
mounting kit contains two 8 x 32 x 1 inch pan head screws and wall anchors for wall or ceiling
mounting.
T-bar hanger clip hole—used to attach a T-bar hanger clip.
•
Security screw hole—used to secure the access point to the mounting plate.
•
Padlock hole—used to attach a padlock (user provided) to secure the access point to the mounting
•
plate. Compatible padlocks are Master Lock models 120T and 121T or equivalent. The security hasp
adapter can also be used with the padlock for increase security protection.
Note
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
2-6
The security hasp covers the cable bay area ( including the power port, Ethernet port, console
port, and the mode button) to prevent the installation or removal of the cables or the
activation of the mode button.
Chapter 2 Installing the Access Point
OL-6226-02