Installation Summary - Cisco Aironet 1130AG Hardware Installation Manual

Installation Summary

Figure 2-4
Figure 2-4
2
1

Installation Summary

While installing the access point, you will perform the following operations:
•
•
•
•
•
•
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
2-8
indicates where you should push to open and close the adjustable T-rail clips.
Adjusting the T-Rail Clips
Push here to open
Open the access point cover (see
Mount the mounting plate on a convenient flat horizontal or vertical surface, such as a desktop, book
shelf, file cabinet, wall, ceiling, or suspended ceiling T-rail. See these sections:
– "Mounting the Access Point on a Horizontal or Vertical Surface" section on page 2-10
– "Mounting the Access Point Below a Suspended Ceiling" section on page 2-12
"Mounting the Access Point Above a Suspended Ceiling" section on page 2-13
–
"Mounting Access Point on a Network Cable Box" section on page 2-15
–
"Mounting Access Point on a Desktop or Shelf" section on page
–
Attach the access point to the mounting plate (see the
Plate" section on page 2-15).
Secure the access point (see the
Connect Ethernet and power cables (see the
page 2-20).
Configure basic settings (refer to
1
2
2 Push here to close
"Opening the Access Point Cover" section on page
"Securing the Access Point" section on page
"Connecting the Ethernet and Power Cables" section on
Chapter 3, "Configuring the Access Point for the First
Chapter 2 Installing the Access Point
1
2-15).
"Attaching the Access Point to the Mounting
2-17).
2-9).
Time").
OL-6226-02