Safety And Instructional Decals - Toro 22333 Operator's Manual

Safety and Instructional Decals

Safety decals and instructions are easily visible to the operator and are located near any
area of potential danger. Replace any decal that is damaged or lost.
1. Operator's Manual location
2. Engine—stop
3. Engine—run
4. Engine—start
1. Warning—read the Operator's Manual.
2. Warning—remove the ignition key and lower the loader arms before leaving the machine.
3. Crushing hazard—install the cylinder lock and read the instructions before servicing or performing maintenance.
4. Cutting hazard of hands or feet—wait for moving parts to stop; stay away from moving parts.
5. Crushing/dismemberment hazard of bystanders—keep bystanders a safe distance from the machine.
6. Explosion and electric shock hazard—do not dig in areas with buried gas or electrical lines.
104-9951
1. Hot surface/burn hazard—wear protective gloves when
handling the hydraulic couplers and read the Operator's
Manual for information on handling hydraulic components.
112-2540
5. Hour meter
6. Fuel gauge—diesel
7. Engine oil
8. Battery
104-9957
9. Engine temperature
10. Glow plug
11. Slow
12. Continuous variable setting
104-9950
1. Warning—read the Operator's Manual; maximum load rating
of 500 lb. (228 Kg).
104-9954
1. Crushing hazard of hands or feet—install the cylinder lock.
9
13. Fast
14. Warning—read the
Operator's Manual.
15. Tipping hazard—move the
traction unit with the heavy
end up hill; do not travel
with the loader arms raised.