Storage - Toro 22333 Operator's Manual

Storage

1. Lower the loader arms, stop the engine, and
remove the key.
2. Remove dirt and grime from the entire traction
unit.
Important: You can wash the traction
unit with mild detergent and water. Do
not pressure wash the traction unit. Avoid
excessive use of water, especially near the
control panel, engine, hydraulic pumps,
and motors.
3. Service the air cleaner; refer to Servicing the
Air Cleaner.
4. Grease the traction unit; refer to Greasing the
Traction Unit.
5. Change the crankcase oil; refer to Servicing the
Engine Oil.
6. Charge the battery; refer to Servicing the
Battery.
7. Check and adjust the track tension; refer to
Adjusting the Track Tension.
8. Check and tighten all bolts, nuts, and screws.
Repair or replace any part that is damaged.
9. Paint all scratched or bare metal surfaces. Paint
is available from your Authorized Service
Dealer.
10. Store the traction unit in a clean, dry garage or
storage area. Remove the key from the ignition
switch and keep it in a memorable place.
11. Cover the traction unit to protect it and keep
it clean.
47