Maintenance; Recommended Maintenance Schedule - Toro 07213 Operator's Manual

Liquid cooled diesel utility vehicle
Table of Contents

Advertisement

Maintenance

Recommended Maintenance Schedule

Maintenance Service
Interval
After first 10 hours
After first 50 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Every 800 hours
Every 1200 hours or 2
years (whichever
occurs first)
1
immediately after every washing, regardless of the interval listed
Important
Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
Check cable adjustments
Torque wheel lug nuts
Check alternator and fan belts
Replace transaxle filter
Replace the engine oil and filter.
Torque cylinder head and adjust valves
Check the battery fluid level.
Check the battery cable connections.
Service the air cleaner.
Lubricate all grease fittings
Inspect condition and wear of tires
Check front differential oil level (4WD)
Replace engine oil and filter
Inspect cooling system hoses
Check cable adjustments
Check alternator and fan belts
Service air cleaner filter
Check front axle CV boot joint (4WD)
Check engine RPM (idle and full throttle)
Torque wheel lug nuts
Check front wheel alignment
Inspect service and parking brakes
Inspect fuel lines
Replace electric fuel pump filter
Replace fuel/water separator filter
Torque cylinder head and adjust valves
Replace transaxle filter
Change transaxle oil
Clean transaxle strainer
Pack front wheel bearings
Change front differential oil (4WD)
Replace all interlock switches
Coolant System – flush/replace fluid
Fuel tank – Drain/flush
Change brake fluid
41

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

07213tc0721707217tcWorkman 3300-dWorkman 4300-d

Table of Contents