BOMBARDIER outlander 800 Operator's Manual page 69

Transmission Position Display
This display will show transmission position.
TYPICAL
1. Transmission position
DISPLAY
P
N
R
H
L
NOTE: If the letter "E" is displayed in the
transmission position display, it means that
there is a electrical transmission position er-
ror. Contact an authorized Bombardier ATV
dealer.
Multi-Function Display
NOTE: Use the selector button to change dis-
play to the desired mode.
TYPICAL
1. Multi-function display
FUNCTION
PARK
NEUTRAL
REVERSE
HIGH GEAR
LOW GEAR
Odometer (ODO)
Odometer records the total distance travelled
either in miles or kilometers.
Trip Meter (TRIP)
The trip meter records distance travelled
since it has been reset. Distance travelled is
displayed either in miles or kilometers.
It can be used to establish a fuel tank range
or distance between 2 way points for in-
stance.
Push and HOLD display selection button for
2 seconds to reset the trip meter.
Hour Meter (TRIP TIME)
The hour meter records vehicle running time
when the electrical system is activated. It can
be used to establish traveling time between 2
way points for instance.
Push and HOLD display selection button for
2 seconds to reset the hourmeter.
Hour Meter (ENGINE HOURS)
The hour meter records engine running time
in the ECM.
Speed/RPM
In the RPM mode, vehicle speed will be auto-
matically displayed once the vehicle moves
over 10 km/h or 6 MPH.
In the speed mode, display will show engine
RPM from 0 to 9000 RPM.
67