BOMBARDIER outlander 800 Operator's Manual page 117

– the cable from the throttle lever housing.
NOTE: Slide cable in clip slot and remove the
end of cable from clip.
V07I0IY
Remove the throttle body side cover.
1. Throttle body
2. Side cover screws
Insert the needle of lubricant can in the end of
throttle cable adjuster.
WARNING
Always wear eye protection and gloves
when you lubricate a cable.
V07I0JY
TYPICAL
NOTE: Place a rag around the throttle cable
adjuster to prevent the lubricant from splash-
ing.
Add lubricant until it runs out at carburetor end
of the throttle cable.
Reinstall and adjust the cable.
115