BOMBARDIER outlander 800 Operator's Manual page 68

Unit Selection (MPH vs KM/H)
The speedometer is factory preset in miles
but it is possible to change it to kilometer read-
ing. Contact an authorized Bombardier ATV
dealer.
NOTE: The unit modification is applied to the
odometer and trip meter.
Display Selector Button
Use selector button to change speedometer
multi-function display to the desired mode:
– odometer
– trip meter (resetable)
– hour meter (resetable)
– vehicle hour meter
– speed or RPM mode.
TYPICAL
1. Selector button
66
Pointer Mode Display
The speedometer pointer has two modes, it
can show vehicle speed or engine revolution
per minute.
1. Pointer
To change pointer from one mode to the other
do the following:
– change speedometer multi-function display
to the odometer (ODO) mode
– push and HOLD display selector button for
2 seconds to change mode.
Speed Mode
In this mode, the pointer indicates the speed
of the vehicle.
The speedometer measures speed from 0 to
140 km/h and 0 to 90 MPH.
RPM Mode
In this mode, the pointer indicates engine
RPM.
The speedometer measures engine RPM
from 0 to 9000 RPM.
NOTE: In the RPM mode, the vehicle speed
will be automatically displayed in the multi-
function display once the vehicle moves over
10 km/h or 6 MPH.