Multi-Controller Applications - Omron ZS-MDC User Manual

Section 1

Multi-Controller Applications

Multi-Controller Applications
●
Measurement of Workpiece Thickness at Multiple Locations
Sensor Heads can be placed so as to sandwich the workpiece and measure its thick-
ness. Logic operations can be performed not only on one location but on multiple loca-
tions to calculate the difference in the measurement result.
●
Measurement of Stepped Workpieces
Logic operations can be performed on measured values obtained from multiple Sensor
Controllers to measure steps in stepped workpieces.
●
Measurement of Average Workpiece Height
Logic operations can be performed on measured values obtained from multiple Sensor
Controllers to measure the average height of workpieces.
ZS-MDC
1-4
User's Manual