Selecting Tasks - Omron ZS-MDC User Manual

Selecting Tasks

By assigning expressions to "tasks," you can process (multi-tasking) multiple logic
operations (max. 4). After selecting the task in the task selection menu, make the various
settings for the selected task in the respective setup menus. The currently selected task is
displayed on the sub-display.
Press the ESC key with the FUN Mode-TOP menu displayed.
Setting
TASK1
TASK2
TASK3
TASK4
• In the RUN and TEACH modes, the task to display can be selected.As function keys correspond to
a stored task, press the function key of the task No. you want to display. (The currently selected task
is displayed as "TKX" on the LCD display.)
• The items that can be set in the FUN mode change according to the currently selected task.When
TASK1 is selected, all items including items common to all tasks can be set. When a task other than
TASK1 is selected, only items specific to that task can be set.Items common to all tasks are as fol-
lows:
• SEL CH
• NO-MEAS
• JUDGE
• ANALOG
• IN
• I/O SET
BANK and SYSTEM can also be changed whichever task is selected.
Selects TASK1 as the destination to store the expression to.
Selects TASK2 as the destination to store the expression to.
Selects TASK3 as the destination to store the expression to.
Selects TASK4 as the destination to store the expression to.
Selecting Tasks
Description
Section 3
ZS-MDC
3-13
User's Manual