Editor's Note; Page Format - Omron ZS-MDC User Manual

Introduction

Editor's Note

Editor's Note

Page Format

Setting the Sensor Controller to Obtain Sensing Information from
Set which gang-mounted Sensor Controller to obtain information from, and which logic
operations are to be performed on that information.
Setting Assignments
Assign the channel to perform logic operation on.
FUNMode-[SENSIN
Setting
INPUT A (input A)
INPUT B (input B)
INPUT C (input C)
INPUT D (input D)
Setting Logic Operation Methods
Set how logic operations are to be performed on the tasks and CH specified by the
assignment settings.
FUNMODE-[SENSING]-[CALC]
Setting
OFF
CH
Inputs do not undergo logical operation when "None" is set. Example: The operation "-B" is per-
formed when "None" is set to input A, "3CH" is assigned to input B and A-B is selected.
Supplementary Explanation
Helpful information regarding operation and reference
pages are introduced here using symbols.
ZS-MDC
8
User's Manual
Setting the Sensor Controller to Obtain Sensing Information from
G]-[ SEL CH ]
Description
Assigns the target Sensor Controller to input A.
Range: None, 1CH onwards (largest CH of gang-mounted Sensor Controllers)
(default: 1CH. Note that range becomes "None" if 1CH does not exist.)
Assigns the target Sensor Controller to input B.
Range: None, 1CH onwards (largest CH of gang-mounted Sensor Controllers)
(default: 2CH. Note that range becomes "None" if 2CH does not exist.)
Assigns the target Sensor Controller to input C.
Range: None, 1CH onwards (largest CH of gang-mounted Sensor Controllers)
(default: 3CH. Note that range becomes"None" if 3CH does not exist.)
Assigns the target Sensor Controller to input D.
Range: None, 1CH onwards (largest CH of gang-mounted Sensor Controllers)
(default: 4CH. Note that range becomes "None" if 4CH does not exist.)
Description
Expressions are not set.
Logic operations are not performed, and the measured value of a specific CH
is input as it is.Select the target CH.
*This page has been made purely for explanatory purposes and does not exist.
Title of each section
Header
Overview
Section 3
Cross-header
Overview of the
cross-header
Index label
Movement
through menus up
to setting items
Explanation of
options
ZS-MDC
3-15
User's Manual
Indicates the section
number and title.